{"product_id":"inov8-carbon-short-camberlink-bulkhead-set-for-yokomo-ms2-0","title":"INOV8 Carbon Short Camberlink Bulkhead Set for Yokomo MS2.0","description":"\u003cp\u003eIntroducing our Brand New Carbon Short Camberlink Bulkhead Set for Yokomo MS2.0!\u003c\/p\u003e\n\u003cp\u003eThe standard design of the MS2.0 caters only to longer camberlinks, which from our findings do not always offer the best handling, this is why on most touring cars, there is an option to use long links, however short links are generally more commonly used. The shorter links provide increased response and steering, and make the car more alive in all conditions as reported by Yokomo team drivers.\u003c\/p\u003e\n\u003cp\u003eWe have developed a shorter camberlink option. These bulkheads attach to the bulkheads and sit correctly with the use of supplied shims (2.5mm front and 2mm rear). The set is supplied with M3 threaded inserts which can be inserted from underneath and then pulled in by tightening the ball studs. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe set does not included the required screws to attach the upper bulkheads, we suggest 4x M3x10mm and 4x M3x6mm Screws, however a range of screw options can be used. You will also require shorter turnbuckles between 25-30mm in length. \u003c\/strong\u003eThe original long links can also be used with this setup, however you won't be able to achieve as lower inside link position as used previously. We suggest using optional lower ball studs from Yokomo which lower the ball to provide a larger tuning window.\u003c\/p\u003e\n\u003cp\u003eIts important to note as mentioned above with this set, that the inner balls will be higher. In testing we have found that raising the outside of the link to maintain a similar angle results in better handling and faster lap times. Just take care to not raise it too much which would cause the outer ball cups to touch the rim.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Front Left Upper Bulkhead\u003c\/li\u003e\n\u003cli\u003e1x Front Right Upper Bulkhead\u003c\/li\u003e\n\u003cli\u003e1x Rear Left Upper Bulkhead\u003c\/li\u003e\n\u003cli\u003e1x Rear Right Upper Bulkhead\u003c\/li\u003e\n\u003cli\u003e2x 0.5mm Shims\u003c\/li\u003e\n\u003cli\u003e4x 2mm Shims\u003c\/li\u003e\n\u003cli\u003e8x M3 Threaded Inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Require Parts for Conversion\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eM3x10 Button Head Screws\u003c\/li\u003e\n\u003cli\u003eM3x6mm Button Head Screws\u003c\/li\u003e\n\u003cli\u003e25-30mm Long Turnbuckles x8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT! Installation Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eWe have supplied a small strip of adhesive rubberized tape. This tape is to be cut to size and installed on the flat part of the milled out section of the bulkheads. This is to grip the eccentric bearing holder and prevent it from rotating and adjusting belt tension while driving. \u003c\/li\u003e\n\u003cli\u003eShims are required under the very front and very rear screws attaching the upper bulkheads to the bulkheads. 2.5mm in the front, and 2mm in the rear. These are supplied, but ensure you assemble this correctly or it could cause a tweak or damage some parts. \u003c\/li\u003e\n\u003c\/ol\u003e","brand":"INOV8","offers":[{"title":"Default Title","offer_id":45424681812025,"sku":"IN8-10608","price":79.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/2993\/9257\/files\/IMG_0291_gm_optimized-Photoroom.png?v=1769914614","url":"https:\/\/www.team-zombie.com\/en-ca\/products\/inov8-carbon-short-camberlink-bulkhead-set-for-yokomo-ms2-0","provider":"TeamZombie","version":"1.0","type":"link"}